Modbus Display Siemens, S7, Logo!, Allen Bradley, Mitsubishi FX, Beckhoff, EATON, easyE4...

The Modbus displays (incl. touch) of the EA HMIxxx family are suitable for direct connection to various control systems (PLC) of the following brands
* Siemens S7

* Siemens Logo!

* Allen Bradley

* Mitsubishi FX

* Beckhoff

* EATON, easyE4 and many more.

A display with touch can be connected directly to these controllers (via Modbus). Some of these PLC controllers are connected via Ethernet/LAN (-> Modbus TCP) and others via RS-485 (-> Modbus RTU).

The display is configured as a slave in each case and enables a wide variety of displays, e.g. values (large display), text, bar graphs, images, diagrams and much more. Input via the touch panel is also possible directly on the surface of the display. The adaptation to the Modbus registers is completely freely selectable. The power supply is typically 24V (6..30V=), connection terminals on the rear or an RJ-45 plug allow cables to be connected without additional tools.
.
The Modbus display is attached directly to the wall using 2 screws with a diameter of 4 mm. Alternatively, it can be integrated into a front panel or a door using mounting corners.
Modbus is a widely used interface in automation technology.
 

Further information on this display series can be found here.