electronica 10-13 November 2026 in munich
Approach - Car
Expertise and quality
Hall B6. Right next to the information desk (click to enlarge)
This year's innovations for embedded world 2026
Highlight #1 – affordable 4.3-inch SPI solution
1,100 cd/m² colour display with SPI interface
The new EA TFT043-42SINN offers unrivalled contrast and viewing angles (>170°) as well as a simple 4-wire SPI interface. It also supports dual-SPI. With a clock rate of, for example, 20 MHz and full colour depth, a refresh rate of up to 50 fps is possible (dual-SPI: 100 fps)
4.3", 480x272, 65,535 colours, IPS, 1,100 cd/m²
Highlight #3
Light guides for backlighting (e.g. EA DOG series)
High-quality light guides for use e.g. as a backlight for displays in the EA DOG family. Extremely cost-effective, as it can be fitted with a wide range of LED colours. Perfect illumination and high brightness levels of well over 2,000 cd/m² are possible.
The light guide is plugged directly onto the mainboard and the LEDs are positioned accordingly.
Currently available in 3 sizes: 54x23x3 mm, 54x39x3mm and 67.5x44x2.8 mm. For EA DOGM162, DOGM163, DOGM081, DOGM132, DOGM128, DOGL128.
From 1.50€ (net)
Highlight #4
White OLED displays
As a self-illuminating display technology, OLEDs have numerous advantages over LCDs. In addition to the extremely flat design, these are above all very wide viewing angles of up to almost 180° all round. Thanks to the deep black level, it impresses with a contrast ratio of >2000:1. The brightness of the controlled surfaces in the 50% checkerboard pattern is 80 cd/m2. That sounds low, but it is brilliant even in bright daylight. At 10 µs, the display reacts extremely quickly, even at freezing -40 °C and scorching +80 °C.
Highlight #5
Micro colour display
With a diagonal of just 0.96 inches, the EA TFT009-81AINN colour display is ideal for installation in hand-held devices of all kinds. The wide viewing angle stability of the IPS panel guarantees excellent readability, even under the most adverse lighting conditions.
The new EA TFT009-81AINN LCD colour display is not even the size of a thumb. Nevertheless, there are 80 x 160 pixels on a surface measuring around one by three centimetres (diagonal 0.96 inches). These can be used to create razor-sharp graphic displays in colour or black and white. The powerful white LED backlight makes the display up to 500 cd/m² bright. This makes it easy to read even in direct sunlight or under bright operating theatre lamps.
Highlight #6
Brilliant and extremely bright with 900cd/m²
With a diagonal of 4" and external dimensions of 78x79x2 mm, the new EA TFT040-77AINN display is ideal for installation in hand-held devices or desktop devices.
The very high resolution of 720x720 pixels with a viewing angle of over 160° make this display a perfectly readable component in your high-quality system. It is controlled via a classic RGB interface.
The display can also be equipped with a touch panel as standard.
Highlight #7
Sunlight-readable colour display
The newly developed 2.4-inch TFT colour display is particularly suitable for mobile use due to its low power consumption. It requires just 10 mA power consumption at 3.3 V and shows crisp contrasts even in sunlight.
The new TFT024-23ATNN is a particularly economical colour display for use in mobile devices in the range. It is very easy to read both with and without illumination. Without illumination, the power consumption is only 35 mW. During an eight-hour working day, this is enough to charge a LiPo battery with no more than 75 mAh. The positive TFT panel with white background can be operated in both colour and black and white. The display is clearly legible even in glaring sunlight.